Service Tel:
中文PRODUCTS
- Mechanical seal of boiler feed pump
- Mechanical seal of circulating pump
- Slurry pump mechanical seal
- Mechanical seal of desulfurization
- Mechanical seal of agitator
- Compressor mechanical seal
- Sewage pump mechanical seal
- Chemical pump mechanical seal
- Metal bellows mechanical seal
- Heat conduction oil pump mechanical
- Mechanical seal of sanitary pump
- Clean water pump mechanical seal
- Mechanical seal of booster pump
- Air-conditioning pump mechanical se
- Mechanical seal of reaction kettle
- Mechanical seal of Chinese standard
- Mechanical seal of paper pulp pump
- Mechanical seal of pressure screen
- Water pump accessories
ZU4/ZB4 series mechanical seals meet DIN24960 and GB6556 standards for centrifugal pumps and similar mechanical rotating shafts. The large CROSS-sectional surface of ZU4/ZB4 series mechanical seals can not only ensure the flatness of the end surface under high pressure, but also have good heat transfer ability, low and uniform temperature rise, strong resistance to thermal deformation. ZB4 refers to the balanced mechanical seal, as the name implies, ZB1 series of mechanical seals are generally used in high pressure conditions, can refer to pressure ≤4Mpa, applicable to all kinds of chemical fluids (excluding easy crystallization, solid containing more granular fluid). This series of mechanical seals have the simple structure of single spring seal and multi-spring seal as uniform end load and excellent dynamic performance, ZU4/ZB4 unique fork transmission structure, mechanical seals in use to obtain better transmission torque.
Working parameters
Rules: 20 ~ 200 mm
Pressure force: 4 mpa or less
The temperature: 0-180 ℃
Wire speed: ≤15m/s
Axial channeling momentum: ±0.5mm
Material combination
Sealing end face: graphite, silicon carbide, tungsten carbide, alumina
Auxiliary sealing: nitrile rubber, fluorine rubber, ethylene rubber, silicone rubber
Metal components: stainless steel, SUS304, SUS316L
The product description
Single face
The balanced
Arbitrary rotation
Drive sleeve drive
Comply with EN12756(DIN24960) standards
In the development and design of any product, we follow the principle of installation size standardization. That is, the installation ruler of this type of mechanical seal is in accordance with international and domestic (API610, API682, DIN24960, ISO3069, GB6556).
